Enhancements:

• PAS-1433 Tag boxes as bank boxes and allow employee access
  Boxes can now be tagged as bank boxes, and employees with proper permissions are automatically granted access to them.
• PAS-1514 Automatic Abandonment of Session after Inactivity
  Sessions are now automatically abandoned after a period of inactivity, improving security and system resource management.
• PAS-1842 Confirm that the user sync is complete only after getting a response from the scanner
  User synchronization is now confirmed only after receiving a proper response from the biometric scanner, ensuring accurate status updates.
• PAS-1867 Show firmware version of the biometric device
  The firmware version of the connected biometric device is now visible in the interface, providing helpful diagnostic information.
• PAS-1949 Remove the device type dropdown for the biometric device and replace it with a label
  To avoid misconfiguration, the biometric device type selection has been replaced with a read-only label showing the detected type.
• PAS-1965 Create ACS Endpoint for Collecting Webview Crash Notifications from HMI Supervisor App
  A new ACS endpoint has been added to collect crash notifications from the HMI Supervisor app, improving monitoring and support.
• PAS-1978 Add Validation to Prevent Duplicate Zone Numbers in Sensor Settings
  Validation has been added to sensor settings to prevent multiple sensors from being assigned the same zone number, avoiding conflicts.

Enhancements:

• PAS-1422 Enrollment from the box page
  Employees can now be enrolled directly from the box page, making the process more intuitive and accessible.
• PAS-1433 Tag boxes as bank boxes and allow employee access
  Boxes can be marked as bank boxes by Site Admins, and employees with bank box leases roles will now have automatic access.
• PAS-1436 Have a checked "Deactivated" checkbox when creating a new site
  Newly created sites will now have the "Deactivated" checkbox selected by default, helping prevent accidental activation.
• PAS-1514 Automatic Abandonment of Session after Inactivity
  Sessions are now automatically ended after a 3hr period of user inactivity, enhancing system security and resource management.
• PAS-1586 Deactivate Employee
  Site Admins can now deactivate Site Employees directly in the interface, restricting their access without needing to delete their profile.
• PAS-1611 Tag Demo Sites to Exclude from Dealer Billing
  Demo sites can now be flagged to ensure they are excluded from dealer billing calculations.
• PAS-1708 Export Sites report
  Global and Dealer admins can now export a report of all sites, providing easier access to site data for audits or offline analysisю
• PAS-1737 Add "Notes" column to sites list
  A new "Notes" column has been added to the sites list for Dealer admins, making it easier to track additional information or internal comments. Site settings has the new field s well.
• PAS-1965 Create ACS Endpoint for Collecting Webview Crash Notifications from HMI Supervisor App
  A new endpoint has been added to collect crash logs from the HMI Supervisor app, improving visibility into app stability.

Enhancements:

• PAS-1954 Move the DMP into last position on the I/O device dropdown
  The DMP device is now moved to the last position in the I/O device dropdown list, making the selection order more intuitive.
• PAS-1967 Add an option to disable IOModule
  An option has been added to disable the IOModule when needed, giving administrators more control over device settings.
• PAS-1968 Change default com port for the receiver
  The default communication port for the receiver has been updated to a new setting, helping avoid conflicts and simplifying setup.

Enhancements:

• PAS-1374 Make employees open unassigned boxes without raising the alarm
  Employees can now access unassigned boxes without triggering the alarm, making the process smoother for authorized staff.
• PAS-1425 Change hint text after uploading a new database
  We updated the on-screen hint that appears after a new database is uploaded, so it’s easier to understand what happens next.
• PAS-1429 Employee biometrics access with an active alert
  Employees can now use their biometric access even when the alarm is active, improving response during alerts.
• PAS-1636 Show failed and queued messages on the Dashboard
  The Dashboard now displays messages that failed or are still waiting to send, giving better visibility into system communication.
• PAS-1813 DHCP server auto configuration
  The system can now automatically configure the DHCP server, cutting down on manual setup steps.
• PAS-1840 Add a message for manual user sync not starting during enrollment
  If manual sync doesn’t begin during enrollment, a clear message now explains why, helping users take the right next step.
• PAS-1844 NTP server auto configuration
  NTP settings are now set up automatically, helping devices keep accurate time without extra configuration.
• PAS-1855 Make HMI buttons disabled while there's user sync in progress
  While syncing users, HMI buttons are now temporarily disabled to prevent accidental interruptions.
• PAS-1802 Output DHCP client list
  The system now provides a list of connected DHCP clients, allowing administrators to easily view active devices and their assigned IP addresses.

Enhancements:

• PAS-1956 Revise Expired Lease Popup to Update Existing Lease
  When an employee adds a customer to a box with an expired lease, a popup now appears to select a new lease end date. This updates the existing lease with the new date instead of creating a new lease, keeping everything neat and organized.

Enhancements:

• PAS-1826 Merge ACS 2.0 into ACS 3.0
  Integrated all key components from ACS 2.0 into ACS 3.0, unifying the system under a single, updated version for smoother ongoing development and support.
• PAS-1834 Rename Waveshare to PZ-520
  The device previously labeled "Waveshare" has been renamed to "PZ-520" across the system for clearer product identification.
• PAS-1835 Rename Edatec to PZ-25X
  Updated all references of "Edatec" to the new name "PZ-25X" to align with standardized naming conventions.

Enhancements:

• PAS-1434 Add a banner for an inactive site for every user type
  A new banner now appears on inactive sites, ensuring users are aware of the site's status regardless of their role.
• PAS-1453 Remove Fingerprint Access Disabled from the box
  The "Fingerprint Access Disabled" message has been removed from the interface for a cleaner user experience.
• PAS-1516 Change logic of selecting employee permissions
  Employee permission selection has been improved, making it easier to choose and assign roles.
• PAS-1518 Password Highlight Copy and Paste in emails
  Users can now easily highlight, copy, and paste passwords from emails without formatting issues.
• PAS-1846 Trim Excess Spaces in User Names
  Extra spaces in user names are now automatically removed to prevent formatting inconsistencies.
• PAS-1864 Center-Align Patent Information on the Site
  Patent details are now neatly centered on the site for a more professional look.
• PAS-1876 Add asterisks to Dealer and Organization dropdowns in the Create New Site form via the Commissioning app
  Required fields in the Create New Site form now include asterisks to improve clarity for users

Enhancements:

• PAS-1116 Add links to display Privacy Policy, Terms and Conditions pages in the footer
  Users can now easily access the Privacy Policy and Terms and Conditions from the page footer, improving visibility for important legal information.
• PAS-1404 Maintenance Window Days Selection
  When a new site is created, every day of the week is pre-selected for maintenance by default.
• PAS-1540 Management app architecture improvement (Boxes, Customers, ScheduledJobs, Sites)
  Enhancements to the architecture of the management app improve performance and maintainability for handling boxes, customers, scheduled jobs, and sites.
• PAS-1570 Show "site is offline" banner only if the site is offline for more than 30 seconds
  The offline banner will now only appear if the site remains offline for at least 30 seconds, reducing unnecessary alerts.
• PAS-1709 Site activation/deactivation event in reports
  Reports now include site activation and deactivation events, providing better visibility into site status changes.

Enhancements:

• PAS-1633 Stay on the same sensor page in the Sensors tables
  When navigating through sensors, the system now keeps users on the same page instead of resetting to the first page. This improves usability when managing multiple sensors.
• PAS-1648 Auto-Return to Home Screen After Inactivity
  The system will now automatically return to the home screen after a period of inactivity. This helps ensure a consistent experience and prevents unintended access to settings.
• PAS-1775 Clarify Biometric Scanner Instructions in Enrollment Screens
  The instructions for biometric scanner enrollment have been rewritten to be clearer and more user-friendly. This helps users complete the process with fewer errors.
• PAS-1777 Add ability to retrieve users from biometric device
  Administrators can now retrieve user information directly from biometric devices, making it easier to manage and verify enrolled users.
• PAS-1778 Biometric device firmware lookup
  A new option allows users to check the current firmware version of biometric devices from within the system. This makes it easier to determine if updates are needed.
• PAS-1785 Display modem signal level
  The system now shows the modem signal strength, helping users identify connectivity issues and improve device placement for better network performance.
• PAS-1801 Force mobile network registration
  A new feature forces mobile network registration, ensuring devices connect to the strongest available network when needed.

Enhancements:

• PAS-1132 Automated billing
  Introduced an automated billing system to handle recurring payments more efficiently for paznic.com integration. This update ensures accuracy in invoicing and reduces manual effort for billing management.
• PAS-1255 Identity Service and SSO
  Implemented a unified identity service that includes Single Sign-On (SSO) capabilities.
• PAS-1579 Update react-scripts and Node
  Upgraded the project to the latest versions of react-scripts and Node.js. These updates improve performance, enhance compatibility, and include important security patches.
• PAS-1406 Remove Global and Dealer admins, Org Admins from user sync
  Reduced the overall sync time and improve system performance

Enhancements:

• PAS-1457 Display User Sync progress in the Commissioning app
  The Commissioning app now provides a clear view of the User Sync progress, helping users track synchronization status more easily.
• PAS-1458 Display User Sync progress on the HMI
  The HMI interface now shows real-time updates on User Sync progress, offering better visibility into the synchronization process.
• PAS-1482 Log failed biometric scan events
  Failed biometric scans are now recorded in the system logs, improving security monitoring and troubleshooting.
• PAS-1581 Display Unresolved System Issues on the HMI Under the menu Section
  The HMI menu now features a dedicated section for unresolved system issues, making it easier to identify and address problems.
• PAS-1582 Include Sensor Name in Alarm Title and Description
  Alarm notifications now include sensor names in both the title and description, helping users quickly identify the source of alarms.
• PAS-1625 Add NTP service to ACS
  The system now includes an NTP service to maintain accurate time synchronization across all connected devices.
• PAS-1741 Add a message for contacting support when Loading page is stuck
  A message now appears with support contact details if the loading page remains unresponsive, guiding users on the next steps to resolve the issue.

Enhancements:

• PAS-1769 Site with modem loses connection with internal firewall
  Resolved an issue where sites using modems experienced disruptions due to conflicts with the internal firewall. This fix ensures stable connectivity, improving the reliability of site communication with the central system.

Enhancements:

• PAS-985 Make HMI design responsive
  Improved the HMI design to adapt effectively to different screen sizes, ensuring better usability across devices.
• PAS-1305 Add the ACS release version to the Commissioning app
  Introduced the ACS release version display within the Commissioning app, providing clear version tracking for users.
• PAS-1428 Manage firewall rules from the application
  Added the ability to configure firewall rules directly within the application, enhancing security management capabilities.
• PAS-1606 Update the feature for updating biometric device firmware with large files
  Enhanced the biometric device firmware update process to support larger file sizes, improving compatibility and functionality.
• PAS-1617 Add a "Delete All Users" button for a biometric device
  Introduced a new "Delete All Users" button for biometric devices, simplifying user management.
• PAS-1630 Make blue action buttons rounded to match the statuses
  Updated blue action buttons with a rounded design, ensuring visual consistency with the status indicators.
• PAS-1726 Make the Loading page responsive
  Improved the responsiveness of the loading page, ensuring better display across a variety of screen resolutions.
• PAS-1733 Add a visual to the fingerprint enrollment
  Added a visual aid to the fingerprint enrollment process, making it more intuitive for users.

Enhancements:

• PAS-1130 Add Door and Room status to the HMI
  Added a new feature to display door and room statuses on the Human-Machine Interface (HMI), improving clarity for system operators.
• PAS-1174 SNMP service improvements
  Enhanced the SNMP service to ensure better reliability and functionality for system monitoring.
• PAS-1180 Add DHCP service to ACS tools
  Integrated a DHCP service into the ACS tools, simplifying network management and configuration.
• PAS-1188 HMI Settings and Commands Screen
  Introduced a comprehensive settings and commands screen on the HMI for easier access and control.
• PAS-1242 Configuration audit report
  Created an audit report feature for tracking and reviewing configuration changes.
• PAS-1306 Put the system online checkmark on the HMI
  Added a visual indicator on the HMI to show when the system is online.
• PAS-1325 Add fully APK upload on the HMI
  Enabled full APK uploads directly from the HMI for seamless updates.
• PAS-1330 Divide different types of events for alarms
  Categorized alarm events into distinct types, making it easier to analyze and respond to alerts.
• PAS-1343 Add an assist session for employees
  Implemented an assist session feature on the HMI to help employees during troubleshooting.
• PAS-1347 Display messages on the HMI explaining why access is denied following a successful biometric scan
  Added detailed explanations on the HMI to clarify access denial reasons after biometric scans.
• PAS-1348 Rename PIN for entering the Biometric Device into the Access Code
  Renamed the PIN field to "Access Code" for clarity and consistency across the interface.
• PAS-1355 Add the User ID and the Access Code under the HMI "Settings" section
  Displayed User ID and Access Code information in the HMI's "Settings" section for user convenience.
• PAS-1356 Add the User ID to the Access Code popup window
  Included the User ID in the popup window when an Access Code is entered for enhanced context.
• PAS-1364 Add a Biometric Policy and Consent and a User Agreement to the HMI
  Introduced Biometric Policy and Consent along with a User Agreement directly on the HMI to ensure compliance.
• PAS-1512 Protectli Modem Fallback
  Implemented modem fallback support for Protectli devices to ensure connectivity in case of failures.
• PAS-1637 Add a user-friendly message when cannot get the modem's settings
  Displayed a helpful message on the HMI when modem settings cannot be retrieved.
• PAS-1639 Add an error message to the modem fallback service if the fallback interface is unavailable
  Added an error message to notify users if the modem fallback service is not functioning.
• PAS-1641 Revise file upload labels to be more intuitive for users
  Improved the clarity of file upload labels to make the process more user-friendly.
• PAS-1642 Hide the file upload for Modem Fallback
  Disabled the file upload feature for modem fallback when it is not applicable.

Enhancements:

• PAS-1242 Configuration audit report
  Introduced a new audit report that helps administrators review configuration changes, providing better oversight and tracking for system updates.
• PAS-1325 Add fully APK upload on the HMI
  Enabled support for direct APK uploads through the HMI interface, making it easier to deploy and update applications.
• PAS-1343 Add an assist session for employees
  Added an "Override" feature to let employees override the customer session.
• PAS-1347 Display messages on the HMI explaining why access is denied following a successful biometric scan
  Updated the HMI to provide clear messages about the reasons for denied access, even when a biometric scan succeeds, offering better transparency to users.
• PAS-1351 Add a "What's New" link to paznic.com release page
  Included a "What's New" link on the application homepage, connecting users directly to the latest release notes on PAS
• PAS-1362 Update EULA text
  Refreshed the End User License Agreement (EULA) to ensure it reflects current policies and compliance standards.

Enhancements:

• PAS-1576 Change values to 12-16in in the enroll palm message
  Updated the distance range displayed in the palm enrollment message to reflect a more accurate 12-16 inch distance. This adjustment provides clearer guidance for users to position their palms optimally, improving enrollment accuracy and reducing the number of failed attempts.
• PAS-1577 Include a visual in the final step of the HMI enrollment process for the Palm reader
  Added a visual aid in the final step of the HMI enrollment process specifically for the Palm reader. This enhancement helps users better understand correct hand placement, enhancing the ease of use and reducing errors during the final enrollment step.

Enhancements:

• PAS-1530 Resolve memory leak issue
  Fixed a memory leak that was causing the system to use more resources over time. This update improves overall stability and ensures better performance during extended use.

Enhancements:

• PAS-1349: Add information to the HMI on where to find the access code
  Added clear instructions to the HMI to guide users on where to locate their access code, making it easier to retrieve the necessary information.

• PAS-1445: Restart followed by Sensor Reset
  Implemented a feature that triggers a system restart followed by a sensor reset, improving the system's recovery process and stability in response to issues.

Enhancements:

• PAS-1341: Rename the Fingerprint Terminal Unavailable alarm into Biometric Device Unavailable
  The "Fingerprint Terminal Unavailable" alarm has been renamed to "Biometric Device Unavailable" for clearer communication about device status and issues.
• PAS-1445: Restart followed by Sensor Reset
  Introduced the ability to restart the system followed by a sensor reset. This improvement enhances system reliability and ensures faster recovery in case of issues.
• PAS-1488: Disable the Site dropdown in the Org Admin Edit form
  The Site dropdown in the Org Admin Edit form has been disabled to prevent unintended site changes during edits, ensuring that site assignments remain consistent.
• PAS-1495: Disable the Dealer, Organization, and Site dropdowns in the Global Admin Edit form
  Disabled the Dealer, Organization, and Site dropdowns in the Global Admin Edit form to prevent any accidental alterations to these critical fields during edits.
• PAS-1496: Disable the Organization and Site dropdowns in the Dealer Admin Edit form
  In the Dealer Admin Edit form, the Organization and Site dropdowns have been disabled to protect against unintentional modifications and maintain data accuracy.

Enhancements:

• PAS-935 Re-enrollment button renamed
  The "Re-enrollment" button has been renamed to provide clearer instructions for users, improving user experience and clarity.

• PAS-1484 Improved customer import performance
  The process of importing customer data has been optimized, resulting in faster import times and improved system performance during customer data handling.

Enhancements:

• PAS-1405 - Prevent Unauthorized Motion Detection Alarms from Raising Alerts:
  Implemented a feature that stops unauthorized motion detection events from triggering alarms. Previously, such alarms could cause unnecessary disruptions and false positives. With this update, the system removes unauthorized motion detections, significantly reducing false alarms and ensuring that only legitimate motion detection events raise alerts.

Enhancements:

• PAS-1377: Change the issue collector link for Feedback button
  The Feedback button has been updated to direct users to a new issue collector link. This enhancement ensures that user comments and issues are routed to the appropriate platform for more effective management and response.

Enhancements:

• PAZNIC-922: Show a message on the HMI when someone tries to scan their biometrics without a lease
  Implemented a new feature that displays a message on the HMI when a user attempts to scan their biometrics without an active lease. This enhancement improves user interaction by providing immediate feedback and guidance.
• PAZNIC-1136: Fingerprints for employees
  Added functionality to support employee fingerprint management. This feature enhances the biometric security system by allowing users to enroll, update, and manage employee fingerprints directly within the system.
• PAZNIC-1211: Set up the "Update Firmware" button for the Biometric device section
  Introduced the "Update Firmware" button in the Biometric device section. This addition allows users to easily update the firmware of their biometric devices, ensuring they can keep their hardware up-to-date with the latest features and fixes.
• PAZNIC-1251: Make Status boxes rounded rectangles and make those smaller
  Redesigned the status boxes to be rounded rectangles and reduced their size. This design change improves the visual appeal and consistency of the interface, making status information more compact and easier to read.

Enhancements:

• PAS-348 Reports: Add Time Zone Switch to Section
  Added a time zone switch to the reports section, allowing users to view reports in their preferred time zone.
• PAS-605 Organizations: Add New Functionality for Changing the Name of the Organization
  Implemented a new feature that enables users to change the name of an organization, enhancing flexibility in organization management.
• PAS-606 Dealers: Add New Functionality for Changing the Name of the Dealer
  Added functionality to allow for the changing of a dealer's name, improving the management of dealer records.
• PAS-1136 Fingerprints for Employees
  Introduced support for managing fingerprints within the employee section, enhancing biometric security features.
• PAS-1197 Automatic Balena Device ID Registration
  Implemented automatic registration of Balena device IDs, streamlining the device setup process.
• PAS-1211 Set Up the "Update Firmware" Button for the Biometric Device Section
  Added an "Update Firmware" button to the biometric device section, facilitating firmware updates directly from the interface.
• PAS-1232 Implement Employee Login Audit Log
  Developed an audit log feature for tracking employee login activities, improving security and accountability.
• PAS-1235 Implement Employee Audit Journal
  Created an audit journal to log and review employee activities, enhancing oversight and traceability.
• PAS-1245 Add Employee Export to Employees Page
  Added an export function to the Employees page, allowing users to download employee data in various formats.
• PAS-1264 Add a Refresh Button Near the Employee PIN Code
  Introduced a refresh button next to the employee PIN code field, enabling users to update and view the latest PIN information easily.

Enhancements:

• PAS-1301 Change the "Active Alarm" Text to "System Alert: Attention Required"
  Updated the text from "Active Alarm" to "System Alert: Attention Required" to better reflect the urgency and nature of the alert, improving clarity and response.
• PAS-1329 Alarm Should Not Be Triggered Every Time for Repeated Events Within 2 Minutes
  Implemented a change to prevent the alarm from being triggered multiple times for the same event occurring within a 2-minute window, reducing unnecessary alerts and improving system efficiency.

Enhancements:

• PAZNIC-959: Make biometric device default option empty
  The default selection for biometric devices is now set to empty, requiring users to manually choose their preferred device and reducing errors from incorrect default selections.
• PAZNIC-987: Box Range Adding Start Box Number
  Improved the Box Range feature by enabling the addition of a specific start box number, allowing for more precise configuration and management of box ranges.
• PAZNIC-1102: Add the "System Info" button to the HMI
  Added a "System Info" button to the HMI, providing users with easy access to detailed system information and status updates.
• PAZNIC-1103: Add the "Settings" button to the HMI
  Introduced a new "Settings" button on the HMI, offering users a quick and convenient way to access and adjust system settings.
• PAZNIC-1124: Add admin user to Fingerprints
  Adding a technician’s PIN code for accessing the fingerprint reader settings
• PAZNIC-1170: Change room status from "Room in Use" to "Room in Use Please Wait"
  Changed the room status message from "Room in Use" to "Room in Use Please Wait," providing clearer instructions and improving communication with users.
• PAZNIC-1226: Acknowledge alarms on the HMI for relay 6
  Enabled the acknowledgment of alarms directly from the HMI, streamlining the process of managing and responding to system alarms.
• PAZNIC-1266: Hide PIN numbers with dots
  Updated the system to hide PIN numbers with dots during entry, enhancing security and preventing unauthorized viewing of PINs.

Enhancements:

• PAZNIC-1103: Add the "Settings" button to the HMI
  Added a "Settings" button to the HMI. This enhancement provides users with convenient access to configuration settings, enabling easier system customization and management.
• PAZNIC-1131: Activate\deactivate site feature
  Introduced the ability to activate or deactivate site features within the system. This new functionality allows administrators to control site operations more effectively, adapting to changing operational needs.
• PAZNIC-1167: Add a mandatory time zone field when adding a site
  Added a mandatory time zone field when adding a new site. This ensures that all site-related activities are accurately recorded in the correct time zone, reducing the potential for timing discrepancies and errors.
• PAZNIC-1183: Add a banner for the site that's selected and offline
  Implemented a new feature that displays a banner when a selected site is offline. This visual alert helps users quickly identify and respond to site connectivity issues, improving overall site management.
• PAZNIC-1186: Show in the report when someone issues an enrollment or manual override
  Enhanced the reporting module to include entries when someone issues an enrollment or manual override. This addition increases transparency and accountability by providing detailed logs of user actions.
• PAZNIC-1200: Put different hours for the sites maintenance window
  Updated the system to allow different maintenance window hours for each site. This improvement offers greater flexibility in scheduling maintenance, accommodating the unique needs and operational hours of individual sites.
• PAZNIC-1226: Acknowledge alarms on the HMI for relay 6
  Enabled the acknowledgment of alarms on the HMI. This feature improves alarm management by allowing users to acknowledge and address specific relay alarms directly from the interface.

Enhancements:

• PAZNIC-146: Show an alarm when motion is detected outside of session
  Introduced an alarm system to notify users of motion detection outside of active sessions, enhancing security measures.

• PAZNIC-821: Add the "Remove all boxes button"
  Implemented a convenient "Remove all boxes" button to streamline box management tasks.

• PAZNIC-986: Add Ping Option to commissioning app
  Added a Ping Option to the commissioning app, facilitating network diagnostics during setup and maintenance.

• PAZNIC-1101: Change the logic of the Service id and Computer name
  Refined the logic governing Service ID and Computer name assignment, ensuring accurate identification within the system.

• PAZNIC-1133: I/O automatically enabled
  Enabled automatic I/O activation, simplifying setup and reducing manual configuration requirements.

• PAZNIC-1141: Device health Monitoring
  Incorporated Device Health Monitoring capabilities to provide proactive system maintenance alerts and monitoring.

• PAZNIC-1143: Arrange boxes in numerical order
  Enhanced box organization by arranging them in numerical order for improved accessibility and management.

• PAZNIC-1144: Add a search field to boxes
  Introduced a search field within boxes to enable quick and efficient navigation through large datasets.

• PAZNIC-1163: System Offline Reporting
  Implemented System Offline Reporting functionality to provide comprehensive status updates even when offline.

• PAZNIC-1171: Update the enrollment button on the HMI
  Updated the enrollment button on the HMI interface to improve clarity and ease of use during user registration processes.

• PAZNIC-1175: Option to automatically connect ZKteco scanners
  Added an option for automatic connection of ZKteco scanners, simplifying device management and integration tasks.

Enhancements:

• PAZNIC-146: Show an alarm when motion is detected outside of session
  Introduced an alarm system to notify users of motion detection outside of active sessions, enhancing security measures.
• PAZNIC-821: Add the "Remove all boxes button"
  Implemented a convenient "Remove all boxes" button to streamline box management tasks.
• PAZNIC-986: Add Ping Option to commissioning app
  Added a Ping Option to the commissioning app, facilitating network diagnostics during setup and maintenance.
• PAZNIC-1101: Change the logic of the Service id and Computer name
  Refined the logic governing Service ID and Computer name assignment, ensuring accurate identification within the system.
• PAZNIC-1133: I/O automatically enabled
  Enabled automatic I/O activation, simplifying setup and reducing manual configuration requirements.
• PAZNIC-1141: Device health Monitoring
  Incorporated Device Health Monitoring capabilities to provide proactive system maintenance alerts and monitoring.
• PAZNIC-1143: Arrange boxes in numerical order
  Enhanced box organization by arranging them in numerical order for improved accessibility and management.
• PAZNIC-1144: Add a search field to boxes
  Introduced a search field within boxes to enable quick and efficient navigation through large datasets.
• PAZNIC-1163: System Offline Reporting
  Implemented System Offline Reporting functionality to provide comprehensive status updates even when offline.
• PAZNIC-1171: Update the enrollment button on the HMI
  Updated the enrollment button on the HMI interface to improve clarity and ease of use during user registration processes.
• PAZNIC-1175: Option to automatically connect ZKteco scanners
  Added an option for automatic connection of ZKteco scanners, simplifying device management and integration tasks.

Enhancements:

• PAZNIC-1203: Move SignalR hub to our domain
  In this release, we have moved the SignalR hub to our domain. This change enhances connectivity and ensures a smoother communication experience within the application.

Enhancements:

• PAZNIC-146: Show an alarm when motion is detected outside of session
  Implemented an alert mechanism to notify users when motion is detected outside of active sessions, enhancing security monitoring capabilities.
• PAZNIC-1117: Add patent info to the page footer
  Enhanced user experience by including patent information in the page footer, providing transparency and legal clarity.
• PAZNIC-1141: Device health Monitoring
  Implemented robust device health monitoring functionality, enabling proactive maintenance and ensuring optimal system performance.
• PAZNIC-1158: Show a message when the site is offline
  Incorporated a notification system to inform users when the site is offline, improving user awareness and minimizing disruptions.
• PAZNIC-1162: Show a message when trying to delete a customer with an active lease
  Implemented a warning message prompt when attempting to delete a customer with an active lease, preventing accidental data loss and ensuring data integrity.
• PAZNIC-1163: System Offline Reporting
  Introduced a comprehensive system offline reporting feature, facilitating analysis and troubleshooting during downtime periods.
• PAZNIC-1169: Update the patent info
  Updated patent information system-wide, ensuring compliance with legal requirements and reflecting recent changes.
• PAZNIC-1185: Enlarge the Site dropdown menu
  Enhanced user interface by enlarging the Site dropdown menu, improving navigation and accessibility for users managing multiple sites.

Enhancements:

• PAS-1161 New Alarm Type for ACS (Relay 6)
  Introduced a new alarm type specifically for Access Control Systems (ACS) using relay 6, enhancing the system's ability to monitor and respond to additional security events.

Enhancements:

• PAZNIC-1065: Job Scheduler Enhancement
  Introducing a powerful enhancement to streamline site maintenance operations. With Feature PAZNIC-1065, our system now includes a sophisticated job scheduler. This scheduler automates tasks like sensor resets, service restarts, and system reboots during maintenance windows, ensuring smoother operations and minimizing downtime. Upgrade now to experience improved efficiency and reliability in your maintenance workflows.

Enhancements:

• PAZNIC-1106: SNMP service for ACS
  Introduced SNMP service for ACS, empowering administrators with comprehensive network monitoring capabilities. This feature enhances visibility into network health and facilitates proactive management.
• PAZNIC-1112: Fallback to cell if WAN connection isn't working (no ping)
  Implemented a fallback mechanism to switch to cellular connectivity seamlessly in the absence of a functional WAN connection. With no ping required, users can maintain continuous access to critical services even during network disruptions.
• PAZNIC-1114: Display Manual override session differently than the ordinary one
  Enhanced session management by displaying Manual override sessions distinctively from ordinary ones. This visual differentiation improves usability and facilitates quick identification of different session types for users.

Enhancements:

• PAZNIC-252: Alarm Management Enhancement:
  Users can now edit alarm notes and view acknowledgments, fostering better communication and accountability within the system.
• PAZNIC-1019: Timezone Flexibility:
  Users now have the ability to easily adjust device timezones, ensuring accurate time representation across diverse locations.
• PAZNIC-1077: Interface Streamlining:
  Transitioning to Manual Site GUID Entry in the Management Interface has been streamlined, simplifying system administration tasks.
• PAZNIC-1078: Improved User Experience:
  Mandatory fields in the employee edit form are now visually marked with asterisks, reducing data entry errors and enhancing usability.
• PAZNIC-1081: Enhanced Identification:
  The Site ID is now prominently displayed on the HMI display, facilitating quick reference and system identification.
• PAZNIC-1084: Streamlined Commissioning Process:
  The new site commissioning process has been optimized with auto-population of the Service ID, reducing manual input and improving efficiency.
• PAZNIC-1087: Dynamic Interface Adjustment:
  The starting enrollment/manual override interface now dynamically adjusts based on site status, optimizing user experience and workflow efficiency.
• PAZNIC-1113: Strengthened Security:
  Added a password complexity hint to promote stronger password practices, enhancing overall system security.

Enhancements:

• PAZNIC-823 Add the Remove selected sensors API (fix the button):
  Implemented a fix for issues with button functionality for seamless sensor management. Users can now efficiently remove selected sensors, streamlining system maintenance.
• PAZNIC-1009 Add a password complexity hint:
  Strengthened system security by integrating a password complexity hint feature, guiding users towards creating robust and secure passwords. This enhancement fortifies authentication mechanisms, mitigating potential security risks.
• PAZNIC-1010 Add modem configuration management:
  Empowered administrators with advanced modem configuration management capabilities, enabling precise control over network settings. This enhancement facilitates optimized network performance and enhances system adaptability.
• PAZNIC-1019 Allow to change device timezone:
  Introduced flexible device timezone adjustment functionality, facilitating synchronization across diverse geographical locations. Users can seamlessly modify device timezones, ensuring accurate timekeeping and coordination across distributed systems.
• PAZNIC-1028 Firewall for Balena (Docker):
  Implemented a robust firewall solution tailored for Balena (Docker) environments, enhancing system security against external threats. This enhancement fortifies system defenses, safeguarding sensitive data and ensuring uninterrupted operation.
• PAZNIC-1081 Show the Site Id on the HMI display:
  Improved system monitoring and identification by displaying Site IDs directly on the HMI. This enhancement provides users with immediate access to crucial system information, enhancing operational efficiency and facilitating quick troubleshooting.
• PAZNIC-1087 Change the starting enrollment\manual override interface depending on the site status:
  Enhanced user experience and system responsiveness by dynamically adjusting enrollment and manual override interfaces based on site status. This adaptive interface optimization ensures streamlined operations and maximizes user productivity.
• PAZNIC-1088 Initiate enrollment\manual override for a specific user upon entering their PIN code:
  Strengthened access control mechanisms by enabling initiation of enrollment or manual override upon entering a user's unique PIN code. This feature enhances system security and user convenience, ensuring authorized access to critical functions.

Enhancements:

• PAZNIC-926 Change Button Text for Single Sensor:
  Altered the button text from "Remove all" to "Remove" for a single sensor, providing clearer functionality and reducing ambiguity in user actions.
• PAZNIC-928 Display Unknown Room Status:
  Implemented the display of an "Unknown" status when the occupancy status is not received from the backend, enhancing user awareness and system feedback in case of data discrepancies.
• PAZNIC-939 Enhanced Logic for Network Connection Selection:
  Improved the algorithm for selecting which Network Connection to update, ensuring a more efficient and accurate process.
• PAZNIC-941 Enhanced Validation in Network Interface Configuration:
  Added thorough empty field checking in Network Interface Configuration, enhancing input validation and preventing erroneous data entry.
• PAZNIC-942 Improved Error Handling in Device and Panels Pages:
  Included detailed field validation errors in Device and Panels pages, providing users with specific guidance for correcting input mistakes.
• PAZNIC-947 Remove 'Restarting Service' Warning:
  Eliminated the 'Restarting service' warning after hub reconnected, streamlining the user experience by removing unnecessary alerts.
• PAZNIC-948 Update Error Messages According to ApiResponse Interface:
  Updated error messages to align with the new ApiResponse interface, ensuring consistency and clarity in error communication.
• PAZNIC-949 Enhanced Field Validation in Box Page:
  Added comprehensive field validation errors in the Box page, improving data integrity and user interaction.
• PAZNIC-950 Improved Field Validation in Sensor Form:
  Enhanced field validation errors in the Sensor form, guiding users to input correct data and reducing potential errors.
• PAZNIC-951 Added Headers in Network Interface Configuration Page:
  Introduced headers in the Network Interface Configuration page based on settings, enhancing page organization and usability.
• PAZNIC-955 Expanded Fields in "Current Profile":
  Added additional fields to the "Current Profile" section, providing users with more customization options and flexibility.
• PAZNIC-956 Include "Current Profile" Title in Network Interface Configuration Tab:
  Incorporated the "Current Profile" title into the enp0s20u5 tab of the "Network Interface Configuration", improving clarity and navigation within the interface.
• PAZNIC-957 Enhanced Validation in Change Password:
  Implemented thorough empty field checking in the Change Password feature, ensuring users provide all necessary information for password updates.
• PAZNIC-994 Consistent Site Unique Id:
  Aligned the Site Unique Id with the Balena device name for consistency, simplifying management and identification processes.
• PAZNIC-1048 Reboot and Sensor Reset with Feedback:
  Introduced reboot and sensor reset functionalities with feedback, providing users with clear confirmation and status updates during these processes.

Enhancements:

• PAZNIC-48 Add "Reset" button to search fields:
  Implemented a "Reset" button within search fields to facilitate effortless clearing of search criteria, enhancing user experience and search efficiency.
• PAZNIC-994: Synchronization between the Site Unique Id and the Balena device name:
  Ensured that the Site Unique Id matches the Balena device name, enhancing consistency across the platform and simplifying identification processes for users.
• PAZNIC-1048 Reboot and Sensor Reset With Feedback:
  Introduced reboot and sensor reset functionality with interactive user feedback, empowering administrators with comprehensive system management capabilities and ensuring smoother troubleshooting processes.
• PAZNIC-1054 Add Sensor reset and Restart Service buttons to the site configuration section:
  Enhanced the site configuration section by incorporating dedicated buttons for sensor reset and service restart, enabling swift and targeted system maintenance actions for improved operational efficiency.
• PAZNIC-1055 Make the Site field text be visible:
  Improved the visibility of the Site field text, ensuring users can easily identify and select the desired site, thereby reducing potential input errors and enhancing navigation fluidity.
• PAZNIC-1056 Add a column with the site name to Employees section:
  Optimized the Employees section by adding a dedicated column displaying the associated site name, providing users with immediate context and facilitating streamlined employee management.
• PAZNIC-1057 Add user-friendly error messages when entering an incorrect email/phone:
  Implemented user-friendly error messages for incorrect email or phone inputs, guiding users towards accurate data entry and minimizing frustration by offering clear feedback on erroneous inputs.
• PAZNIC-1062 Employee gets created without first and last names:
  Enforced mandatory first and last name fields during employee creation, ensuring data completeness and accuracy while mitigating potential data entry errors.
• PAZNIC-1063 Clear the filter upon clicking the "Reset" button:
  Enhanced usability by automatically clearing filters upon clicking the "Reset" button, streamlining the search process and providing users with a clean slate for subsequent searches.
• PAZNIC-1066 Clear all filters when clicking the "Reset" button:
  Improved user experience by implementing a feature to clear all filters with a single click of the "Reset" button, simplifying navigation and ensuring ease of use.

Enhancements:

• PAZNIC-58 Service ID field is now mandatory
  The Service ID field is made mandatory for better data accuracy, promoting completeness and consistency in service records.
• PAZNIC-1017 Add a site service tag (Site Unique ID) search field
  Introduced a search field for the Site Unique ID to enhance site management, making it easier to locate and manage specific sites within the system.
• PAZNIC-1029 Added UI for global search to v1
  Implemented a user-friendly global search UI for improved navigation and accessibility, enhancing the overall usability of the PAZNIC system.

Enhancements:

• PAZNIC-1011: Introducing Site Service Tag
  Implemented a new Site Service Tag to provide users with additional functionality and organization options for their sites. This enhancement aims to improve site management capabilities.

Enhancements:

• PAS-934 Handle Updated Interface for Biometric Device Status in Messages from Hub
  Implemented support for handling the updated interface for biometric device status in hub messages, ensuring compatibility with new status formats.
• PAS-937 Add PA22 Palm Reader Support
  Added support for the PA22 palm reader, enabling its integration and functionality within the system.

Enhancements:

• PAS-795 Add the Devices Section
  Added a new section dedicated to managing devices, improving the organization and usability of device-related features.
• PAS-796 Add the Boxes Section
  Introduced a new section for managing boxes, making it easier to view and configure box settings.
• PAS-797 Add the Files Section
  Created a new section for managing files, centralizing file-related operations within the platform.
• PAS-798 Add the Change Password Section
  Added a section specifically for changing passwords, enhancing user security and password management.
• PAS-799 Add the Service Status Indicator
  Implemented a service status indicator to provide real-time updates on the system's operational status.
• PAS-810 Make Temporal Redesign of Legacy Pages
  Temporarily redesigned legacy pages to improve their appearance and usability while awaiting a complete overhaul.
• PAS-818 Replace Message After Adding Sensor Successfully
  Updated the success message displayed after adding a sensor, providing clearer feedback to users.
• PAS-824 Prepare Sidebar for Mobile View
  Optimized the sidebar for mobile viewing, ensuring better navigation and usability on smaller screens.
• PAS-831 Change Font from Bold to Normal for Statuses
  Updated the font style for status labels from bold to normal, improving readability and visual consistency.
• PAS-832 Remove the "Periodic User Sync" Checkbox
  Removed the outdated "Periodic User Sync" checkbox, streamlining the user interface.
• PAS-833 Add Dropdown for Selecting the Device Type
  Introduced a dropdown menu for selecting the device type, making it easier to configure devices accurately.
• PAS-834 Change Message After Successful Box Adding
  Updated the message displayed after successfully adding a box, providing clearer confirmation to users.
• PAS-839 Change Message After Adding a Sensor with Incorrect Zone Number
  Updated the error message when adding a sensor with an incorrect zone number, offering clearer guidance to users.
• PAS-840 Update the Message When Updating a Box
  Revised the success message shown when a box is updated, providing clearer feedback.
• PAS-841 Sensors Not Available on the Box View/Edit Page
  Fixed an issue where sensors were not displayed on the box view/edit page, ensuring they are now visible and editable.
• PAS-842 Status 401 Shown in Page Alert When Unauthorized User Requests Data
  Improved the error handling for unauthorized data requests, showing a clear status 401 alert.
• PAS-846 Update the Message After Adding a Panel Successfully
  Revised the success message shown after adding a panel to provide more detailed confirmation.
• PAS-847 Move Sensor-Related Messages Down to the Sensors Block
  Adjusted the positioning of sensor-related messages, placing them within the relevant sensors block for better context.
• PAS-848 Update the Message for Saving Biometric Device Settings
  Revised the message displayed when biometric device settings are saved, improving clarity.
• PAS-849 Update the Message for Saving DMP Panel IP Settings
  Updated the success message shown when saving DMP Panel IP settings, providing clearer confirmation.
• PAS-850 Update the Message for Saving DMP Panel Port Settings
  Revised the message shown after saving DMP Panel port settings, offering better feedback to users.
• PAS-851 Update the Message for Saving DMP Panel Account Number Settings
  Updated the success message for saving DMP Panel account number settings, ensuring clear communication.
• PAS-852 Add a Message After Updating the System Settings
  Added a confirmation message that appears after system settings are successfully updated.
• PAS-853 Update Message After a Successful Password Change
  Improved the message displayed after successfully changing a password, making it clearer and more informative.
• PAS-854 Move Panel-Related Buttons Above the Add Sensor Block
  Repositioned panel-related buttons to sit above the sensor block, improving the layout and usability.
• PAS-861 Move the Connect Button
  Relocated the "Connect" button to a more intuitive position, enhancing the user interface.
• PAS-863 Deactivate the Connect Button Once Panel Is Connected
  Updated the system to deactivate the "Connect" button once a panel is successfully connected, preventing redundant actions.
• PAS-867 Add Validation for Panel Account Number
  Implemented validation checks for the panel account number field, ensuring correct input before submission.
• PAS-868 Add Validation for Sensor Serial Number
  Added validation for the sensor serial number, preventing errors caused by incorrect entries.
• PAS-869 Add Validation for Box Number
  Introduced validation for the box number field, ensuring that only valid numbers are accepted.
• PAS-870 Add Confirmation Dialogs for Some Panel Actions
  Added confirmation dialogs for specific panel actions, reducing the risk of accidental changes.
• PAS-871 Add Confirmation Dialog for Removing Sensors from Box
  Introduced a confirmation dialog to verify the removal of sensors from a box, adding an extra layer of security.
• PAS-882 Move Buttons on the Box View Page
  Repositioned buttons on the box view page for better accessibility and usability.
• PAS-883 Add an Alert for Unsaved Sensor Changes
  Implemented an alert that notifies users of unsaved sensor changes, preventing potential data loss.
• PAS-888 Make the "Disconnect Button" Red
  Changed the "Disconnect" button to red, making it more visually distinct and easier to identify.
• PAS-889 Update Auxiliary I/O Box
  Updated the Auxiliary I/O box for improved functionality and user experience.
• PAS-890 Make Open Door Status Red Instead of Green
  Changed the color for the "Open Door" status to red, aligning it with standard alert color coding.
• PAS-894 Add Subtitle on Panels Page When No Panels Are Added
  Added a subtitle on the Panels page to inform users when no panels have been added yet.
• PAS-895 Reset Hub Context on Connection Close
  Implemented a feature to reset the hub context when the connection is closed, ensuring proper system state.
• PAS-896 Add a Message to All Pages When Service Is Offline
  Added an offline message across all pages to inform users when the service is down, improving communication.
• PAS-897 Check Token When Going Back to Inactive Tab/Window
  Added functionality to check the token when a user returns to an inactive tab or window, maintaining session security.
• PAS-900 Add a General Information Page/Dashboard
  Introduced a general information dashboard that provides an overview of key system metrics and data.
• PAS-901 Update the Timezone Dropdown
  Revised the timezone dropdown to include updated and more accurate timezone options.
• PAS-902 Make Network Interface Name a Dropdown
  Changed the network interface name input to a dropdown menu, simplifying the selection process.
• PAS-903 Add a Hint for the DNS Fields
  Added helpful hints for the DNS fields, guiding users on what information to input.
• PAS-905 Add a Colon After the "Auxiliary I/O" Label
  Updated the label for "Auxiliary I/O" to include a colon, improving consistency in formatting.
• PAS-908 Add IPv4 Mask to All Fields for IP Addresses
  Introduced IPv4 masking to all IP address fields, enhancing network configuration accuracy.
• PAS-910 Activate Created Network Connection
  Ensured that newly created network connections are automatically activated, streamlining the setup process.
• PAS-911 Make "Disable Auxiliary I/O" Button Red
  Updated the "Disable Auxiliary I/O" button to red, making it easier to identify critical actions.
• PAS-914 Boxes Page: Clear Old Codebase, Prepare New Code Base for Review
  Cleared out the outdated codebase for the Boxes page and prepared a new, optimized codebase for review.
• PAS-915 Panels Page: Clear Old Codebase, Prepare New Code Base for Review
  Updated the Panels page by clearing the old codebase and setting up a new codebase for evaluation.
• PAS-916 Network Interface Page: Clear Old Codebase, Prepare New Code Base for Review
  Cleared and updated the codebase for the Network Interface page, preparing it for a comprehensive review.
• PAS-918 Remove the Auxiliary I/O Checkbox When Adding a New Panel
  Removed the Auxiliary I/O checkbox from the panel addition process to simplify the interface.
• PAS-919 Add Hostname to Tab Name
  Updated the tab name to include the hostname, improving clarity and navigation.
• PAS-920 Add Hostname to Status Section
  Added the hostname to the status section, providing more context and information at a glance.
• PAS-923 Make Status Section Clickable and Send User to Dashboard
  Made the status section clickable, enabling users to quickly navigate to the dashboard for more detailed information.

Enhancements:

• PAS-395 Employees: Exclude Dots from Temporary Password
  Updated the system to ensure that temporary passwords generated for employees no longer include dots, simplifying the password format and reducing potential confusion.
• PAS-769 Update HMI Text When Enrolling Palm
  Revised the text displayed on the Human-Machine Interface (HMI) during palm enrollment to provide clearer instructions and improve the user experience.

Enhancements:

• PAS-577 Migrate to Zkteco PUSH SDK
  Migrated the system to use the Zkteco PUSH SDK, improving the integration and functionality of Zkteco devices within the platform.
• PAS-625 Palm Vein Reader Integration
  Integrated palm vein reader technology into the system, allowing for advanced biometric authentication and enhanced security features.

Enhancements:

• PAS-138 Update Projects to .NET Core 6
  Upgraded all projects to use .NET Core 6, improving performance, security, and compatibility with the latest framework features.